Installing the antenna on a wall:
Steps 1-5 are the same as when installing the antenna near a Set Top Box or a TV. When you have
found a suitable position continue with the following:
Step 6: mark the position with pencil or a pen
When mounting on a wooden wall:
Step 7: Using a screw driver fix the provided screws in the marked position. Leave the screws about
15mm out of the wall. Attach the standing
unit on it
.
7.
.
FINAL
When mounting on a brick wall:
Step 7: Drill a hole using a 5.8 mm. drill bit. The depth of the hole should be approximately 35 mm.
Step 8: Insert the plastic pole into the hole.
Step 9. Screw the provided screws into the plastic pole using a screwdriver. Leave the screws out of
wall about 15mm and attach the standing unit on it.
9
.
8.
7
.
FINAL
