Maxkon WS-1081PC, Operation Manual

- 6 - 

Positioning 

Once you have verified that all of the components of the weather station are working, they can be 
positioned in their permanent places.    Before permanently mounting, make sure that all components 
work properly together at their chosen mounting or standing locations.   
   
Note: Commonly the radio communication between receiver and transmitter in the open field can 

reach a distance of up to 330 feet providing that there are no interfering obstacles such as 
buildings, trees, vehicles, high voltage lines, etc.       
Radio interferences such as PC screens, radios or TV sets can, in bad cases, entirely cut off 
radio communication. Please take this into consideration when choosing standing or mounting 
locations.    

Setting Up 

Note: Because of the default settings already determined by the manufacturer it may not be 

necessary for the majority of users to perform – except the Relative Air Pressure (see further 
down) - any further basic settings. Changes, however, can be easily made.   

   
For basic settings, the following menu is started by touching the Touch Screen in the desired display 
area.   

     
  The basic settings can now be performed in the following successive order:       

 Note: setting procedure can be exited at any time by touching any other function area (except “+”, “-” 
or “ON/OFF”). 

indoor temperature 

Activate the indoor temperature related setting by       

1)Touch the INDOOR TEMPERATURE section, + button and – button will be flashing. Touch the +

button or – button to Shift the display unit between 

℃

 and 

℉

2)Touch the INDOOR TEMPERATURE section again to set the indoor temperature high alarm 

function, the +, ON/OFF and – button will be flashing, HI AL icon will light up. Touch the+ button or 

– button to change the value, hold the+ button or – button for 3s to change the number in great step. 

Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker icon will 
be turned on indicating the alarm function has been enabled). 

3)Touch the INDOOR TEMPERATURE section the third time to set the indoor temperature low alarm 

function, the +, ON/OFF and – button will be flashing, LO AL icon will light up. Touch the+ button or 

– button to change the value, hold the+ button or – button for 3s to change the number in great step. 

Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker icon will 
be turned on indicating the alarm function has been enabled). 

4)Touch the INDOOR TEMPERATURE section the fourth time to display maximum indoor 

temperature record, the maximum records will be flashing, MAX icon will light up as well. Hold the 
flashing max value for 3s, the maximum value will be reset to current reading.