Maxkon WS-1081PC, Operation Manual

5)Touch the INDOOR TEMPERATURE section the fifth time to display minimum indoor temperature 

record, the minimum records will be flashing, MIN icon will light up as well. Hold the flashing min 
value for 3s, the minimum value will be reset to current reading. 

outdoor temperature 

Activate the outdoor temperature related setting by       

1)Touch the OUTDOOR TEMPERATURE section, + button and – button will be flashing. Touch the +  

button or – button to Shift the display between Outdoor Temperature, Wind Chill and Dew Point. 

2)Touch the OUTDOOR TEMPERATURE section again, + button and – button will be flashing. Touch 

the + button or – button to Shift the display unit between 

℃

 and 

℉

3)Touch the OUTDOOR TEMPERATURE section the third time to set the outdoor temperature high 

alarm function, the +, ON/OFF and – button will be flashing, HI AL icon will light up. Touch the+  
button or – button to change the value, hold the+ button or – button for 3s to change the number in 
great step. Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker 
icon will be turned on indicating the alarm function has been enabled). 

4)Touch the OUTDOOR TEMPERATURE section the fourth time to set the outdoor temperature low 

alarm function, the +, ON/OFF and – button will be flashing, LO AL icon will light up. Touch the+  
button or – button to change the value, hold the+ button or – button for 3s to change the number in 
great step. Touch the ON/OFF button to choose the alarm on or off (if alarm is enabled, the speaker 
icon will be turned on indicating the alarm function has been enabled). 

5)Touch the OUTDOOR TEMPERATURE section the fifth time to display maximum outdoor 

temperature record, the recorded maximum value will be flashing, MAX icon will light up. Hold the 
flashing max value for 3s, the maximum value will be reset to current reading. 

6)Touch the OUTDOOR TEMPERATURE section the sixth time to display minimum outdoor 

temperature record, the recorded minimum value will be flashing, MIN icon will light up as well. Hold 
the minimum value for 3s, the minimum value will be reset to current reading. 

Indoor humidity 

- 7 -