Connection diagram
User Guide
1.Check the PoE switch
(1) Please check the enclosure, RJ45 ports, LED indicators, make sure they are ok.
(2) Connect the PoE switch with power, make sure the initialization of PoE switch is as
below:
POE indicator is off at the beginning when power connected
PWR indicator is on and it keeps on
Other green indicators will be on, then off after one or two seconds
2.Connection cables
(1) Connect the PoE switch to PD(IP camera, wireless AP) by CAT5 or 6 cables
(2) Connect the external power adapter to PoE switch
(3) Connect the power cord to AC plug
