19
EN
Note:
The two ends of the rear support are
wheel-shaped for non-slip
3. Installation of the pedals
Please attach the right pedal on the right side while the left pedal on the left
side. And assemble them with a small wrench as shown in the picture.
Right Pedal
Use a small wrench to tighten
the pedal bolt on the crank groove
clockwise to install the right pedal.
Left Pedal
Use a small wrench to tighten
the pedal bolt on the crank groove
counter clockwise to install the
left pedal.
The two ends of the rear support
are wheel-shaped for non-slip.
geformt geformt: