21
1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
STEP 2 - CHOOSE METHOD OF INSTALLATION
NOTE: MAXON
recommends pre-installing the extension plate and mounting plates
on the vehicle body before installing the Liftgate.
NOTE:
In METHOD 1, the extension plate and mounting plates come separate as
part of the bolt-on installation kit.
Three methods for mounting a BMR-CS Liftgate
on a vehicle body are covered in this manual.
FIG. 21-1
FIG. 21-3
FIG. 21-2
METHOD 1 -
Column mounting plates and
extension plate can be welded
to vehicle body before bolting
on the Liftgate
(FIG. 21-1)
. Refer
to the
PRE-INSTALL MOUNT
ING PLATES AND EXTENSION
PLATE ON VEHICLE
instruc-
tions in
STEP 3
.
METHOD 3 -
Liftgate equipped with exten-
sion plate can be welded to
vehicle body
(FIG. 21-3)
. Re-
fer to the
WELD LIFTGATE
TO BODY
instructions in
STEP 3
.
METHOD 2 -
Column mounting plates and ex-
tension plate are assembled to
Liftgate at factory
(FIG. 21-2)
.
Refer to the
WELD BOLT-ON
LIFTGATE TO BODY
instruc-
tions in
STEP 3
.
Summary of Contents for BMR-CS
Page 103: ......
