Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
12
Version 2021
Instruction, GPC-X spacer kit installation,
Kit p/n 211915-01
(a spacing dampers between GPC-X platform and truck body)
1.
Kit components:
2.
Steel bar installation
(before lift-gate installation)
•
for 102" wide truck, use full length of the 98" length spacer bar.
•
for 96" width truck, shorten spacer bar by 3" equally from two ends.
•
place and clamp the spacer bar horizontally at level with bed height.
•
use the bar as a template to transfer holes locations on truck rear sill.
•
drill 5x 17/32" diameter holes; remove burrs and sharp edges.
•
use provided nuts and screws to mount the spacer bar as shown.
Summary of Contents for GPC 22 X1
Page 2: ......
