Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
28
Version 2021
Assembly of electrical equipment in series 11
CAUTION
Before starting to connect the electrical equipment, disconnect the vehicle battery. Follow the
vehicle manufacturer’s instructions for correctly handling the battery.
Foot control
The foot control is connected to the cable set located inside the platform and has already been
factory tested. After assembling the platform, the cable set from the central power unit must be
affixed alongside the lifting arm with the delivered cable straps in such a way that no pinching or
rubbing is possible.
Central power unit
The control unit (main controls, main power unit) containing the service-switch is located inside
the power unit and was pre-assembled in our factory. The connections from the power unit’s
clamping strip (see drawing)
to
the cabin switch *1, to the control panel *2, to the platform
*3, and optional to the cable remote *4,
are to be made during assembly. All cables must be
affixed on to the device using the delivered cable straps.
Summary of Contents for GPC 22 X1
Page 2: ......