Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
9
Version 2021
IMPORTANT
Please follow these important steps before starting installation.
1. Read and fully understand complete installation manual.
2. Check and verify that your vehicle dimensions are
correct for the model of liftgate that you are installing.
Vehicle mounting data is found on page 20 of the
installation manual.
3. The Stabilizer bar
must be mounted before
liftgate is installed on the
truck body lnstall the 1/2"
spacer on the body. This spacer bar is always used with
exception of liftgate behind swing doors. See page 12 for
further instructions.
The power pack was already filled
with oil in the factory. If oil is required, use recommended oil
type found in the chart on page 36 to fill the reservoir.
CAUTION
Caution with transport. Failure can result in injury.
do not lift at the power pack
no pressure or shocks
do not use pry bars
Caution!
Summary of Contents for GPC 22 X1
Page 2: ......