13
1.
Pull the external power
switch to turn on power for
the controls
(FIGS. 13-
1A and 13-1B)
.
2.
Move the platform all the way
out as follows. Hold the
Enable
operation
switch in the on posi-
tion
(FIG. 13-2)
. Then, hold
the external toggle switch in the
OUT
position until the platform
slides all the way out
(FIG. 13-
3)
.
PLATFORM OUT
FIG. 13-3
TURNING ON POWER WITH
EXTERNAL SWITCH
FIG. 13-1A
OPERATION
ENABLE SWITCH
& OUT SWITCH
FIG. 13-2
NOTE:
If necessary, release the
toggle switch to stop the
platform from moving.
POWER
SWITCH
TOGGLE
SWITCH
ENABLE
SWITCH
EXTERNAL
CONTROL BOX
FIG. 13-1B
NOTE:
The external control box
requires 2-hand op-
eration. To operate the
toggle switch, the Enable
switch must be held in
the on position.
Summary of Contents for GPSLR
