17
only. Calls made in Conventional modes may vary depending
on the System setup. Consult your Maxon Dealer for specific
information.
Placing a Telephone Call (Model TP-4800 only)
Auto Interconnect Operation
A. Turn power on and set the volume as desired.
B. Select a System that contains an interconnect group.
The "telephone" icon will appear in the LCD
display. You may enter the phone mode from a non-
interconnected group but the System selected must
have at least one telephone interconnect Group.
(When the SND key is pressed the unit will
automatically select the first available interconnect
Group and transmit the displayed telephone
number).
C. Select the "Phone" mode by pressing the PHONE key.
The word "PHONE" will appear in the upper right
portion of the display.
D. Enter the number to be dialed, or recall a number from
memory locations 1-8, by pressing REC 1-8.
(Information on storing and recalling a number
from memory is detailed in the following sections).
E. Press the SND key. The Maxon TP-4800 will access the
Trunked Group, send the phone number and return
to the receive mode.
NOTE: In some Systems or with a very weak signal, it
may be necessary to press the P-T-T button to access
the dial tone and then press the SND key.
