MaxTech NXP-16, User Manual

8

ning the SETUP program.

3.

Follow the Remote Boot Workstation instal-
lation procedure given in your network oper-
ating system manual (i.e. create a Boot
Image on the server for Novell networks, or
start remote booting services on LAN Man-
ager networks, etc.).

Section Three - Driver Installation

The network operating system (i.e. Novell, Win-
dows NT, LAN Manager, etc.) that you are using
requires a driver to access the network adapter
card. 

The network adapters are NE-2000 com-

patible and can use the NE-2000 driver supplied
with your network operating system

. Drivers for

most popular network operating systems are in-
cluded on the driver diskette in separate
subdirectories. These drivers can be copied to your
hard-drive by using the INSTALL.EXE program on
the driver disk. Information on using each driver is
available by running HELP.EXE from the root
directory of the driver disk.

Section Four - Troubleshooting

This section describes some of the common prob-
lems you may encounter while using your network
adapter. When troubleshooting, you should make
sure that the network you are connected to is

Align ROM
and socket

notches

Figure 2