background image

©

 October 30, 2003 Maxtor Corporation. All rights reserved. Printed in U.S.A.

This publication could include technical inaccuracies or typographical errors. Changes are 
periodically made to the information herein – which will be incorporated in revised editions 
of the publication. Maxtor may make changes or improvements in the product(s) described 
in this publication at any time and without notice.

UL/CSA/VDE/TUV 

UL standard 1954 recognition granted under File No. E78016

CSA standard C22.2-950 certification granted under File No. LR49896

TUV Rheinland EN 60 950

Tested to FCC Rules for Radiated and Conducted Emissions, Part 15, Sub Part J, for Class-
B Equipment.

PATENTS

These products are covered by or licensed under one or more of the following U.S. Patents:

 

4,419,701; 4, 538,193 4,625,109; 4,639,798; 4,647,769; 4,647,997; 4,661,696; 
4,669,004; 4,675,652; 4,703,176; 4,730,321; 4,772,974; 4,783,705; 4,819,153; 
4,882,671; 4,920,442; 4,920,434; 4,982,296; 5,005,089; 5,027,241; 5,031,061; 
5,084,791; 5,119,254; 5,160,865; 5,170,229; 5,177,771; Other U.S. and Foreign Pat-
ents Pending.

Maxtor

®

, MaxFax

®

 are registered trademarks of Maxtor Corporation, registered in the U.S.A. 

and other countries. Maxtor DiamondMax Plus9, AutoTransfer, AutoRead, AutoWrite, Dis-
Cache, DiskWare, Defect Free Interface, and WriteCache are trademarks of Maxtor Corpora-
tion. All other brand names or trademarks are the property of their manufacturers.

Maxtor reserves the right to make changes and improvements to its products, without 
incurring any obligation to incorporate such changes or improvements into units previously 

Summary of Contents for DiamondMax Plus9 120GB AT
















































































Reviews: