12
2. Cut the 20mm square tube with
a hacksaw. Make the cut so that
the line is left on the discarded
part of the tube.
3. Now mark and cut the 4mm
spindle so that it is 40mm longer
than the tube.
REAR OF VEHICLE
40mm
4. With the Coupler Bush aligned to the rear of the vehicle insert the Tube and Coupler Bush
through the ceiling hole and into the antenna unit. Aluminium Tube should not protrude
past the coupler bush.
CRANK UP NZ INSTRUCTIONS MASTER.indd 12
17/09/2013 13:01