21
Elevation Home
Position (House
icon fully visible**)
Lowering the Antenna - ready for travel
1. Unlock the Azimuth lock onto the
RED
position, then
Rotate the Dish Direction Unit until it aligns with
the Base Plate as shown. Once aligned re-lock
Azimuth to
GREEN
position to apply brake.
2. Lower the antenna by rotating the Elevation
Handle anti-clockwise (approximately 25 turns
from 25 degrees until you see home position
in the window).
**NOTE: The home position will go past
the elevation window once during the
lowering operation before you see the Home
Position for the
second time
. This is normal
operation. Be sure you count this twice so
that you can be sure system is fully collapsed.
3. Slowly turn the handle until elevation
indicator fully shows the home position
and you feel some park resistance.
Do not over wind the handle as this may
damage the satellite system.
CAUTION: As a manual system we always
recommend the ‘3 point safety check’
Before travelling;
1. Elevation readout must show the
Home position (check park resistance felt)
2. Azimuth Lock Lever must be in the Green
Position and Park arrows aligned
3. Visual check on your roof to ensure the
Antenna is fully lowered.
Align Read
Out
Window to
Base Plate
Arrow
Lock is on
GREEN
prior
to travel also.
Lower
(anti-clockwise)
This is how you handle should
always look like prior to travel > > >
CRANK UP NZ INSTRUCTIONS MASTER.indd 21
17/09/2013 13:01
