Pack contents check
A. Reflector Plate x 1
B. Support Arm x 1
C. Dipole x 1
D. Joining Plate x 2
E. Support Arm Bracket x 4
F. Washer x 4
G. M5 Nut x 4
H. M5 x 25mm Screw x 4
I. Screw x 1
J. Mast Clamp x 1
K. Rear Boom Assembly x 1
L. Front Boom Assembly x 1
B
A
D
J
F
G
H
1.
Join the 2 pieces of boom together using the
joining plate, M5 x 25mm screws M5 nuts and
5mm Shake Proof Washers.
2.
3.
Assembly
Screw the Dipole firmly to the Boom.
Fit the support arm to boom of the aerial using the four joining plates. Secure with nuts and bolts.
I
E
C
4.
Slide on and firmly push down the Reflector onto
the groove of the Reflector Bung.
5.
Attach aerial to suitable mast (not included)
using the supplied Mast Clamp.
L
K
