EN
User Manual
s
afety
instrUctions
•
Read the manual carefully before using the
device.
•
Do not clean the device with solvents.
•
Safety symbols:
Warning sign
Complies to european CE safety
standards
WARNING!
Do not point the laser directly into the
eye or to any reflective surface!
•
When used in places with different
temperatures allow 30 minutes for the device
to adapt before using.
•
Keep away from electromagnetic fields,
welding, induction forges, etc.
•
Do not leave the device on a high temperature
object or near it.
•
Keep the device clean to prevent dirt getting
into the laser hole and other gaps.
s
etUp
1. IR sensor
2. Laser pointer
3. LCD display
4. Down button
5. Up button
6. MODE button
7. Laser - Backlight button
8. Trigger
9. Grip
10. Battery cover
11. Hold signal
12. Measuring in progress signal
13. Emissivity signal and value
14. Low battery power, lock and laser signal
15. Backlight active signal
16. °C / °F signal
17. Low / High alarm
18. Temperature values MAX, MIN, DIF, AVG,
HAL, LAL
19. Signs EMS MAX, MIN, DIF, AVG, HAL, LAL
20. Temperature value
21. Up button (for EMS, HAL, LAL)
22. MODE button
23. Down button (for EMS, HAL, LAL)
24. Laser / backlight on/off switch
Functions of the MODE button
This infrared thermometer can measure
maximum (MAX), minimum (MIN), difference
(DIF) and average (AVG) temperatures. It stores
the data from every measurement which can
be recalled with the MODE button until you
perform another measurement. If you pull the
trigger again, the device measures again in the
previously selected mode. This button is also
used to set the High and Low alarm values.
