13
ENGLISH
USAGE
To get the best results, wash your hair with shampoo,
wipe it with a dry towel, dry with a hairdryer and comb
your hair. After that you can start styling your hair.
– Divide the hair into locks 4-5 cm wide.
– Put the unit on the safety stand (3) on a flat heat-
resistant surface.
– Insert the plug into the mains socket.
– Switch the unit on by setting the power switch (6) to
the position «ON», the light indicator (5) will light up.
– Wait for some time required for the operation surface
(2) heating.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the lock
on the operating surface (2) and move the clamp (4)
down. Holding onto the protecting tip (1) and handle
(7), wind the lock around the operating surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– when using the unit for the first time, foreign smell
can appear. It is normal.
– do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with
one hand and by the handle with the other (7).
– during breaks in operation, place the unit on the safe-
ty stand (3) on a flat heat-resistant surface.
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After the unit operation, switch the unit off by setting the
power switch (6) to the “OFF” position and unplug it.
– Put the unit on the safety stand (3) on a flat heat-
resistant surface and let it cool down completely.
CLEANING AND CARE
– Before cleaning unplug the unit and let it cool down
completely.
– Do not immerse the unit, power cord and power plug
of the unit into water or any other liquids.
IM MW-2411.indd 13
13.07.2018 15:55:38
