8
ENGLISH
IRON MW-3043
The iron is intended for ironing clothes
and bedding and for vertical steaming of
fabrics.
DESCRIPTION
1.
Water spray
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Heating element ON/OFF indicator
8.
Power cord protection
9.
Base
10.
Water tank
11.
Temperature control knob
12.
Maximum water level mark
13.
Soleplate
14.
Beaker
ATTENTION!
For additional protection it is reasonable to
install a residual current device (RCD) with
nominal operation current not exceeding
30 mA. To install RCD, contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this
instruction manual carefully and keep it for
future reference.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or damage to property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to
the unit operating voltage.
•
The power cord is equipped with a «euro-
plug»; plug it into the socket with a reliable
grounding contact.
•
To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, do not switch
on several electrical appliances with high
power consumption at a time.
•
Do not use the iron outdoors and in places
with high humidity.
•
Place the iron on a flat stable surface or use
a stable ironing board.
•
ATTENTION! The surfaces of the iron get
hot during operation. Avoid contact of open
skin areas with the iron’s hot surfaces or
outgoing steam to avoid burns.
•
Do not fill the water tank with scented liq-
uids, vinegar, starch solution, descaling
reagents, chemicals etc.
•
Do not switch the unit on in places where
aerosols are sprayed or highly flammable
liquids are used.
•
To avoid damaging the soleplate non-
stick coating be very careful when ironing
clothes with metal zippers or buttons.
•
Make sure that the power cord is not on the
ironing board and it doesn’t touch hot sur-
faces and sharp edges.
•
Never leave the unit connected to the mains
unattended. During breaks in operation and
when the iron is cooling down, put the iron
on the base (in vertical position).
•
Before plugging/unplugging the iron, set
the temperature control knob to the mini-
mum position and switch the continuous
steam supply off.
•
Always unplug the iron if you are not using it.
•
Always take the power plug out of the mains
socket before filling the water tank with
water.
•
The water inlet lid should be closed during
ironing.
•
To unplug the iron, always hold the power
plug, do not pull the power cord.
•
To avoid electric shock, do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining
water.
•
Pour out water from the water tank only
after unplugging the iron.
•
Clean the unit regularly.
•
Do not touch the unit body and the power
plug with wet hands.
•
Do not allow children to touch the iron body
and the power cord during operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave
polyethylene bags, used as packaging,
unattended.
IM MW-3043.indd 8
02.11.2018 12:03:51
