VENTAMATIC, LTD.
• P.O. BOX 728, MINERAL WELLS, TX 76068 •
PHONE
800-433-
1626 •
FAX
940-325-
9311 •
WWW.MYMAXXAIR.COM
Your Maxx Air fan is shipped fully assembled. Enjoy the
powerful, cooling breeze that the fan will provide for virtually
any indoor application. There are no additional spare parts
shipped with this item.
Specifications
Totally enclosed motor meets NEC 547-7 (2008) requirements
for use in Agricultural Areas. Model HVWM 18CD has a
110-120 Volt A/C polarized grounded plug. Model HVWM 18CD
GFCI has a Ground Fault Circuit Interrupter. Do not remove
grounding conductor from lug or use with an extension cord.
Warning
To reduce the risk of fire or electric shock, do not use with any
solid state speed control device. This fan motor is equipped
with an automatic reset overload device. The fan may start un-
expectedly. Do not put any object through the grilles into the
blade or motor. This fan is designed for indoor use only. Do not
expose to the elements or allow to become wet. Do not use to
exhaust hazardous chemicals or vapors. Unplug unit for
storage, when not in use or moving locations.
Installation
Minimum Attachment Requirements:
2x4 studding capable
of supporting at least 50 lbs.
Use a 3/8” diameter x 2” long Lag Screw with flat washer (
not
included
). Attach the fan to the wall using the centermost hole
in the wall bracket with the above mentioned lag screw.
Additional screws can be used to stabilize the wall mount if
needed, however, they are not required.
Please Call: 1.800.433.1626
if you have any questions about
the installation or operation of this fan.
Operating Instructions
1. Plug cord into a properly grounded receptacle.
2. If applicable, press the RESET button on the GFCI plug.
3. Turn the knob on the fan to select the desired speed or turn
the fan off.
Cleaning and Maintenance
Warning: Unplug the fan from electrical supply before
cleaning.
1. Use soft, damp cloth to clean fan. Remove any moisture
with a clean, dry cloth.
2.
Do not
use any cleaning solution that is harmful to paint or
plastic.
3.
Do not
bend blade when cleaning fan.
4.
Motor is permanently sealed and does not require addi-
tional lubrication.
MODEL NUMBER: HVWM 18CD and HVWM 18CD GFCI
18” WALL MOUNT FAN —
OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
—
READ AND SAVE THESE INSTRUCTIONS
HRD INS 18CD - REV. 12/08/20
•
Disconnect fan when moving from one location to another.
•
Disconnect fan when removing guards for cleaning.
•
Make sure fan is on a stable surface when in operation.
•
Rain and moisture may create an electrical hazard.
•
This appliance has a 3-prong plug. To reduce the risk of electri-
cal shock, this plug is intended to fit in an outlet one way. If this
plug does not fit in the outlet, contact a qualified electrician.
•
WARNING:
Do not use this fan with any solid-state speed
control device.
AVERTISSEMENT:
NE CONVIENT PAS À DES
RÉGULATEURS DE VITESSE À SEMI-CONDUCTEURS.
•
CAUTION:
For general ventilating use only. Do not use to
exhaust hazardous or explosive materials or vapors.
•
CAUTION:
Disconnect the power to the fan before cleaning.
•
DO NOT insert fingers or any objects through grille guard when
fan is in operation.
•
DO NOT operate fan if any part is damaged or missing.
WARNING
—
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
