Maxx Ice MIM100, User Manual

 27

4.

  Clean button:

 When this button is pressed, the unit enters the Cleaning mode. The 

green andyellow LEDs flash together. To stop the Cleaning mode, just press the 

button again. 

5.

 Mode button:

 Mainly for service. When this button is pressed, unit can change 

from Ice Making mode to Ice Harvest mode, or from Ice Harvest mode to Ice 

Making mode. You can judge the mode from the status of the green and yellow 

LEDs.

7.

Ice Size Adjustment Guide: 

1.)    Press and hold the “

Adjust

” button for at least 3 seconds. The unit will enter 

the Ice Size Adjustment mode. The “

ICE Making

blinking continuously during the ice size adjustment. Release the button when 
the LED blinks continuously to adjust the ice size. 

2.)    While in the Ice Size Adjustment mode, press the “

Clean

” button or the 

“

Mode

” button for the desired ice size.   

Smaller ice setting:

By pressing the “Clean” button, you can decrease the size of the ice cubes. 
The “ICE FULL” LED (red) will flash as you lower the ice size and will 
finally be blinking at the setting of smallest ice size. 

Larger ice setting:

By pressing the “Mode” button, you can increase the size of the ice cubes. 
The “ICE HARVEST” LED (yellow) will flash as the larger size is set and 
will blink when the setting of largest ice size has been reached. 

After 10 seconds without any operation, the unit will automatically memorize 
the current state and return to the previous mode.   

NOTE: Avoid letting water contact the control box.

Major Functions 

1. Completely automatic operating procedure. 
2. When the ice storage bin is full of ice cubes, the machine stops working 

automatically and starts again after the cubes are removed. 

3. The different colors of the LED display indicate various work modes. 

6.  

Adjust button: 

Mainly for service. When this is pressed over 3 seconds, the unit  

will enter the Ice Size Adjustment mode. The mode  can be judged from the status 

of the green LED. 

” LED (green) will be

NOTE:   



During the ice size adjust

me

nt, the “

ICE FULL

”, “

ICE MAKING

” and “

ICE 

HARVEST” LEDS blinking all at once indicate th

a

t the unit is in the regular (middle) 

setting of the ice size.   



When the machine is in the cleaning stage or ice full stage, the ice size is not available 

for adjusting. 

4.    Ice cube size is adjustable.