Page | 11
INSTALLATION TYPES
This ice maker has only been designed for mobile (free-standing) installation
Mobile installation:
An enclosed installation will allow you to install the ice cube machine under a counter or in a kitchen
cabinet provided the required clearance space around the ice maker is respected.. You must follow
the stated instructions for:
a Electrical requirements
b Water supply
Cleaning before use
After you remove all tape from the machine, clean the inside of your ice maker and ice storage bin
before using them. See “Interior Cleaning” in the Cleaning and Maintenance section.
Operation
FINAL CHECK LIST BEFORE OPERATION
1.
Have all packing materials and tape been removed from the interior and exterior of the ice maker?
2.
Did you clean the ice storage bin?
3.
Have the installation instructions been followed, including connecting the machine to water
and electricity?
4.
Has the machine been leveled?
5.
Is the ice cube machine in a site where the ambient temperature is between 50º F (10º C) and 100º
F (38º C) and the water temperature between 41º F (5º C) and 90º F (32º C) all year round?
6.
Has the water supply pressure been checked to ensure a minimum of 15 psig with a static
pressure not to exceed 80 psig?
7.
Is there a clearance of at least 6” (150 mm) at the rear and sides, 1” (25 mm) at the top for
proper air circulation?
8.
Has the power supply voltage been checked or tested against the nameplate rating? And has
proper grounding been installed for the ice cube machine?
9.
Is the ice cube machine plugged in?
10.
Have you turned on the main water supply and the tap?
11.
Have you checked for leaks at all water supply connections?
Control Panel
(in the front panel of the machine)
You will find the control panel in the front panel
of the machine This control panel offers four pressure
sensitive buttons and a LCD display screen
1
ON/ OFF Button.
Powers the ice machine.
2
Bin Full Process:
When the words of "Bin Full" display, the ice storage bin is full of ice or
something is holding the water curtain open The unit will stop working When ice cubes are
taken out of the ice storage bin, releasing the water curtain, the words of "Bin Full" will fash for
3 minutes. The unit will then restart and returns to the ice making mode.
3
Making Ice Process:
When the words of "Making Ice" display, the unit is working in the Ice
Making mode controlled by a temperature probe on the evaporator and a fixed timer.
4
Harvesting Ice Process:
When the words of "Harvesting Ice" di splay, the unit is working in the Ice
Harvest mode controlled by a temperature probe on the evaporator and a fixed timer
.
5
Clean Button:
When this button is pressed, the unit enters the Cleaning mode. the screen will
display "Cleaning" To stop the Cleaning mode, just press the button again.
6
Mode Button:
Recommended for service technician only.
When this button is pressed, unit
can change from Ice Making mode to Ice Harvest mode or from Ice Harvest mode to Ice
Making mode. You can judge the mode from the displaying contents on the screen.
7
Water Fill Process:
When the words of "Water Fill" display, there are three minutes for water inlet
and self-checking After three minutes the ice maker will start to make ice automatically.
