INSTALLATION INSTRUCTIONS,
INFORMATION AND OPERATING GUIDE
for
MAXXFAN
®
Mini
MODELS 4301M
and
4401M
for
MAXXFAN
®
and
MAXXFAN
®
Plus
MODELS
4000K, 4001K, 4002K, 4050K, 4201KW, 4251KW,
4301K, 4401K, 4500K, 4501K, 4541K, 4700K, 4751KS,
4761KS, 4800K, 4801K, 4900K, 4951KS
WARNING!
To reduce risk of fire, injury to persons or damage to property, use only
in the manner intended by AIRXCEL, INC. Should you have questions, please contact
AIRXCEL/MAXXAIR VENTILATION SOLUTIONS Customer Service at 316.832.4357.
P/N: 11F90000K
01-2018
READ AND SAVE THESE INSTRUCTIONS
NOTE:
Refer to Installation Instructions, Information and Operation Guides regarding the
model you have purchased.
The
MAXXFAN
installs into a standard RV roof opening of 14 by 14 inches.
To determine if your roof opening is correctly sized, simply remove the interior ceiling garnish
trim ring of your existing roof vent and measure the ceiling opening or verify the opening is
large enough by sliding the
MAXXFAN
interior Garnish trim ring into the opening.
The
MAXXFAN
Mini
is designed for a minimum roof thickness of 1 inch to a maximum
of 6 1/2 inches.
The
MAXXFAN/MAXXFAN
Plus
is designed for a minimum roof thickness of 2 inches
to a maximum of 6 1/2 inches. If your roof thickness is less than 2 inches, build additional
thickness at the ceiling opening using wood or other suitable material.
The
MAXXFAN
requires a minimum 12 Volt DC, 5 amp service. Confirm that the circuit
you intend to use will accommodate the additional load. Use the proper gauge stranded
wire for electrical connections.
MAXXFAN
®
