REMOTE CONTROL OPERATING GUIDE
WIRELESS REMOTE CONTROL FOR
MAXXFAN
®
Plus
MODEL 4500K
OPTIONAL for MAXXFAN
®
Plus
MODELS 4700K, 4800K, 4900K
FAN ON & POWER OFF
-
Press this button:
•
To start the fan
•
To turn the fan off
•
To exit Auto Mode
VENT LID POSITION
-
Press this button to open or close the vent lid
•
While the fan is running in Manual Mode press once to close the vent lid and
enter “Ceiling Fan” Mode.
NOTE:
This button is not active in Auto Mode. If the fan loses 12volt RV power
or power is removed from the fan, use the knob located at the ceiling to manually
open or close the vent lid if desired.
AIR EXHAUST / INTAKE
-
Press this button to reverse the fan from intake
or exhaust
NOTE:
In Auto Mode, the fan direction is automatically positioned to Exhaust, but
may be overridden and changed to Intake by depressing this key.
FAN AUTO MODE
-
Press this button to enter Auto Mode
•
Auto Mode allows the fan lid to automatically open and the fan motor to
operate as dictated by the thermostat set point temperature. Once the cabin
temperature cools and reaches the set point temperature, the fan lid will close
and the fan motor will shut off.
•
Pressing this button while in Auto Mode will shut off Auto Mode, close the vent lid
and shut off the fan motor.
THERMOSTAT SET TEMPERATURE
TEMP +
~ Press this button to increase the Set Temperature for Auto Mode.
TEMP -
~ Press this button to decrease the Set Temperature for Auto Mode.
NOTE:
The thermostat ranges is from 29°F to 99°F or -2°C to 37°C. To change from Fahrenheit to Celsius on
the temperature display, press and hold both set temperature keys simultaneously.
FAN SPEED
Fan Speed +
~ Press this button to increase the fan speed. The fan has ten speeds.
Fan Speed -
~ Press this button to decrease the fan speed. The fan has ten speeds.
NOTE:
When the fan speed reaches either the maximum or minimum speed, the fan will respond with 2 quick
beep sounds to indicate this.
LOW BATTERY
INDICATOR
•
When the battery is at full
charge, three black power
bars are displayed.
•
One or zero power bars
displayed
indicates
the
batteries
need
replacement.
TRANSMISSION SIGNAL
•
This symbol is displayed
on the screen when
any button is pressed to
indicate the signal was
transmitted to the fan.
•
A beep sound from the
ceiling unit indicates the
signal from the remote
control was received by
the fan.
CEILING FAN
SET
TEMPERATURE
TRANSMIT
LOW BATTERY
INDICATOR
AIR DIRECTION
INDICATOR
CEILING FAN MODE
FAN SPEED
VENT LID
POSITION
FAN OFF
INDICATOR
VENT LID IN
AUTO MODE
FAN ON
INDICATOR
ROOM
TEMPERATURE
AUTO MODE
INDICATOR
Remove protective film from
Display Screen
ENJOY your new
MAXXFAN
®
in
ALL WEATHER CONDITIONS
with the
NEW FANMATE
®
featuring
EZ
Clip
TM
Hardware for
TOOL FREE INSTALLATION. Visit
AIRXCEL.com
for details.
8
