OPERATION OF YOUR
MAXXFAN Dome fan
•
To open the MAXXFAN Dome lid push the button on the handle to dis-engage the clip and
slide the handle away from you until the clip engages the upper opening.
•
To close the lid, push the button on the handle to dis-engage the clip and pull the handle
toward you until the clip engages the lower opening.
•
Operation of your
MAXXFAN Dome
simply entails pushing the ON/OFF button on the fan to
activate the exhaust fan.
•
The optional LED lighting on the garnish ring is operated by the push button on the garnish
ring. The LED lighting and fan operate independently
•
Close the lid to impede infiltration of air when exhaust fan is not in use.
•
The MAXXFAN Dome fan should not be operated with the lid closed.
USER INSTRUCTIONS SERVICING
Cleaning of your
MAXXFAN Dome
may be achieved with mild soap and water only. The screen
can be removed for cleaning by removing the four (4) screws.
Before removing the screen for cleaning, ensure the fan is turned to the OFF position.
CAUTION: Do not operate the fan with the screen removed.
The
MAXXFAN Dome
fan has a 5 amp fuse. To access the fuse, turn the fuse cap to the left to
remove the cap. Replace the fuse with a 5 amp, type GMA fast acting fuse. Replace the fuse cap to
secure the fuse in the fuse holder.
Should you have questions, please contact AIRXCEL / MAXXAIR VENTILATION SOLUTIONS
Customer Service at 316.832.4357.
For WARRANTY information, please visit www.airxcel.com/maxxair.
