MAXXAIR
MAXXFAN MINI PLUS & DELUXE
with
WALL CONTROLS
INSTALLATION INSTRUCTIONS,
INFORMATION AND OPERATING GUIDE
FOR MAXXFAN MINI MODELS 3802, 3852,
3803, 3853, 3804, 3854
READ AND SAVE THESE INSTRUCTIONS
NOTE:
Refer to Installation Instructions,
Information and Operation Guides
regarding the model you have
purchased.
The
MAXXFAN MINI / MINI Plus / MINI
Deluxe
installs into a standard RV roof
opening of 14 by 14 inches.
To determine if your roof opening is
correctly sized, simply remove the
interior ceiling garnish trim ring of your
existing roof vent and measure the
ceiling opening or verify the opening is
large enough by sliding the
MAXXFAN
MINI / MINI Plus / MINI Deluxe
sleeve
into the opening.
The
MAXXFAN MINI / MINI Plus / MINI
Deluxe
is designed for a minimum roof
thickness of 1 inch to a maximum of 4
1/2 inches.
The
MAXXFAN MINI / MINI Plus / MINI
Deluxe
requires a minimum 12 Volt DC,
2 amp service. Confirm that the circuit
you intend to use will accommodate the
additional load. Circuit must be fused
and use appropriate gauge stranded
wire for electrical connections.
P/N: 11A90030Z
08-2019
