EN
24
9. Clean the attachment or the tip (see the
“Cleaning and Storage” chapter).
CLEANING AND STORAGE
Please Note!
■
Do not use any sharp or abrasive cleaning
agents or cleaning pads to clean the de-
vice. These may damage the surfaces.
•
Wipe down the attachments (
3, 4
) and if
necessary also the remaining parts of the
device with a clean, damp cloth. Then
dry with a soft cloth.
•
Store the device and accessories in a dry
place that is protected from dust, dirt and
direct sunlight and cannot be accessed
by children or animals.
TROUBLESHOOTING
If the device does not work properly, check
whether you are able to rectify the problem
yourself. If the problem cannot be solved
with the steps below, contact the customer
service department.
Do not attempt to repair an electri-
cal device yourself!
The device does not work. The dis-
plays (6, 7) remain dark.
The battery is too weak or inserted incor-
rectly.
►
Insert a new battery or insert the battery
the other way round.
The stimulation is too weak or can-
not be felt even though a high pulse
strength has been set.
The circuit is broken.