Maxxus 600354-00019-0001, Installation & Operating Manual

11

ENG

Transport

In order to transport your training device simply and safely, the front stand is equipped with transport rollers. 
To move the exerciser, stand behind the device and grab the transport handle with both hands. Lift the training 
device until the main weight of the device is resting on the front transport rollers. Now you can simply push or 
pull the device along on the transport rollers and place it in the desired position. When lifting, transporting and 
positioning the device always make sure that you have a secure footing. 

Location & Storage

This training device was designed for exclusive use in dry, well-ventilated indoor areas. Use or storage in damp 
or wet areas, such as saunas, swimming pools, etc. and in outdoor areas, such as balconies, terraces, gardens, 
garages, etc. is excluded.

These locations may give rise to electronic defects, corrosion and rust due to the high humidity and low temper-
atures prevailing there. Under no circumstances will any claims for damages of this kind be accepted under the 
warranty.

Please choose a dry, level and warm place to store your training device. For your own sake, also make sure that 

you choose a training area which is sufficiently ventilated to ensure optimum oxygenation during training. Before 

putting your training device back into operation after a long period of non-use, make sure that all fastenings are 
secure.

Cleaning

Clean your exerciser after each workout. Use a damp cloth and soap. 

Never use solvents. Regular cleaning contributes significantly to the preservation and longevity of your training 

device. 
Damage caused by sweat or other liquids is not covered by the warranty under any circumstances. During train-

ing, make sure that no fluid can enter the exercise machine or the computer.

Maintenance

Sealed bearings are used in your training device, lubrication of the bearings is not required.  

Checking the Fastenings

Check tightness of nuts and bolts at least once a month and re-tighten them if necessary 

Checking the Components

Before each workout, check that the saddle, seat support, handlebars and pedals are securely fastened.

 WARNING: 

Never train if one or more of these components are loose.

Transport, Location & Storage

Care, Cleaning & Maintenance

Transport Rollers 

Transport Handle