Timing
min
11
ENG
Operation
Pause Function
Function
Key
Description
Display
Note
Pause
Stops or starts the current massage
The time continues to run in Pause
Mode.
Press the “Pause” key to interrupt the current massage. All massage functions will stop automatically as soon as this key is
pressed. To continue with the massage, press the “Pause” key again.
Adjustment of the Reclining Position
Function
Key
Description
Raising Func-
tion
If you press and hold this key the back rest will simultaneously come up and the leg rest
will go down.
A signal will sound when the maximum upwards position for the back rest and down-
wards position for the foot rest have been reached and both will stop there.
To stop the movement in any particular position, press the key again.
Lowering
Function
If you press and hold this key the back rest will simultaneously go down and the foot rest
will come up.
A signal will sound when the maximum upwards position for the foot rest and the down-
wards position of the back rest have been reached and both will stop there.
To stop the movement in any particular position, press the key again.
Zero G Func-
tion
Press this key to select one of the three preset reclining positions.
Setting the Timer
Function
Key
Description
Note
Time Setting
Press this key to adjust the massage time
in 5 minute increments to a maximum of
30 minutes
If you go above 30 mins, the display
will reset to 5 minutes
Ending the Current Massage
Press the „Pause“ key to interrupt the current massage. As soon as the key is pressed all massage functions
will automatically stop. Press the “Pause” key again to continue with the massage. As soon as you want to end
the current massage, press the ON/OFF key on the remote control. Now all massage functions will automatical-
ly stop and the back rest will raise up into the maximum position and the foot rest will lower into the maximum
position. If the set time of the current massage has been reached, the massage functions will also automatically
stop. The position of the back rest and the foot rest will however remain unchanged. To bring these into their
home positions (back rest up / foot rest down) press the ON/OFF key on the remote control.
