5
ENG
Damage or defects that have arisen due to assembly errors are not covered by the warranty. Please read the in-
structions carefully before starting assembly, follow the sequence of assembly steps exactly and the instructions
for each assembly step. The installation of the exercise equipment must be carried out by competent adults.
Since some components may have sharp-edges, wear suitable work gloves during assembly.
Carry out the assembly of your training equipment in an area that is level, clean and free from at obstructions.
Carry out the assembly with 2 people. Your training device must only be used after fully completing.
Step 1: Assembling the Front Stand
−
Loosen and remove the two screws (30), two spring washers (52) and two washers (17) attaching the
transport lock (A) to the front of the base frame (25).
−
Remove the transport lock (A).
−
Fix the front stand (34) with the same two screws (30), spring washers (52) and washers (17) to the front of
the base frame (25).
Assembly
