8
Step 4: Assembling the Slide Rail to the Base Frame
−
Connect the cable (45a) protruding from the front of the slide rail (40) at to the cable (27) coming out of the
base frame.
−
Insert the slide rail (40) in the bracket of the base frame (25).
CAUTION
: Carefully slide the excess length
of cable from the connected cables (45a + 27) into the slide rail (40). Make sure that you do not crush or
damage the cables.
−
−
Fix the slide rail (40) to the base frame (25) with a hexagon bolt (28), two washers (24) and a lock nut (23).
Then place a cap (22) each on the nut (23) and the screw head of the hexagon bolt (28).
−
Insert the knob (36) with a washer (37) from above into the corresponding hole on the base frame (25) and
tighten it (clockwise) firmly to the slide rail (40).
Assembly