Cockpit
Training profiles (PROGRAM P01 - P12)
Step 1: Programme selection
After you have started pedalling and the instrument panel has switched on, "P00" appears in the RPM window. PRESS
START FOR QUICKSTART OR MODE FOR SETUP" appears in the lower display.
Now press the PROGRAM button repeatedly until the desired training profile P01 to P12 is displayed in the RPM window.
Now "PRESS START FOR QUICKSTART OR MODE FOR SETUP" appears again in the lower display.
Press the MODE button.
Step 2: Entering the user age
The lower display shows "USE LEVEL +/- KEYS TO ADJUST AGE". Then "AGE > 35" appears.
Now enter your age with the +/- keys.
Then press the MODE button.
Step 3: Entering the user weight
USE LEVEL +/- KEYS TO ADJUST WEIGHT" appears in the lower display. Then "WEIGHT > 70" appears.
Now enter your weight with the +/- keys.
Then press the MODE button.
Step 4: Entering the training time
USE LEVEL +/- KEYS TO ADJUST TIME" appears in the lower display. The value "24:00" flashes in the TIME window.
Now enter the desired training time with the +/- keys.
Then press the MODE button.
Step 5: Start training
PRESS START TO BEGIN OR MODE TO MODIFY" appears in the lower display.
Press the START/STOP button to start the training.
Use the +/- buttons to change the load level during the training.
The training ends automatically when the preset training target is reached.
Note:
The user data is not saved in this programme.
Program P1
Program P2
Program P3
Program P4
Program P5
Program P6
16
