8
Assembly
Step 5: Mounting the handlebar
Connect the two cables of the hand pulse measurement (84) that protrude from the handlebar shaft (2) with
the cable ends (85) that protrude from the handlebar (9). The order of the connection is irrelevant as the
cables are identical.
Then fasten the handlebar (9) to the handlebar shaft (2) with three hexagon socket screws M8x20 (11),
three spring washers Ø8 (31) and three washers Ø8 (29).
Attention:
When inserting and attaching the handlebar (9), make absolutely sure that you do not crush or damage the
cables.
Step 6: Fitting the handlebar cover & water bottle holder
Insert the front and rear handlebar stem cover (57 - front/58-rear) on the handlebar stem (2) below the
cockpit and fix it to the handlebar stem (2) with one pan-head screw M5x15 (26) and two self-tapping screws
4x16 (24).
Then mount the water bottle holder (62) to the front of the handlebar stem (2) with two pan-head screws
M10x6.