11
ENG
Vertical Seat Adjustment
You can change the position of the seat vertically, i.e. adjust the height. With this you can
find the optimal distance to the pedals. Loosen the knob on the seat tube. Adjust the seat
to the desired height and then tighten up the knob again.
CAUTION:
The maximum adjustable height of the seat is marked on the seat tube with “STOP”.
Horizontal Seat Adjustment
You can change the position of the seat horizontally, i.e. adjust the position backwards
and forwards. With this you can adjust the seat at an optimal distance from the handle-
bars. Simply loosen the lever underneath the seat and push the seat into the desired
horizontal position. Then tighten the lever again.
Vertical Handlebar Adjustment
It is possible to change the vertical position, or height of the handlebars. To do this
loosen the lever on the front of the handlebar shaft. Adjust the handlebars to the desired
position and then tighten the lever again.
CAUTION:
The maximum adjustable height of the handlebars is marked on the handlebar tube with
“STOP”.
Horizontal Handlebar Adjustment
It is possible to change the horizontal, or lengthwise position of the handlebars. With this
you can find the optimal distance to the seat. Simply loosen the lever on the handlebar
slide bracket. Then push the handlebars into the desired horizontal position and tighten
the lever again.
CAUTION:
The horizontal and vertical position of the handlebars and seat must never be altered
during training. Always stop your training dismount the bike to alter these positions.
Please check that the lever and knob are both firmly tightened before each training ses
-
sion. Never train on this device if the knob or lever are loose.
Adjusting Position of the Seat & Handlebars
Knob
Lever
Lever
