13
ENG
Key Pad
RESET
Resets the training value to zero, ends the training completely. Switches the cockpit
back on from standby mode.
START/STOP
Starts or pauses the selected training
MODE
Training program selection
Increases or reduces the braking reisistance from level 1 to 31 or entries made during
programming.
RECOVERY
Starts the recovery pulse measurement
Display Values
TIME
Displays the training time – pre-set value option from 10 to 99 minutes
SPEED/RPM
Alternating display of SPEED in km/h and revolutions per minute (RPM).
CALORIES
*
Displays the calories – pre-set value option from 10 to 9,999 calories
DISTANCE
Displays the training distance – pre-set value option from 1 to 9,999 kilometres
WATT/LEVEL
Alternating display of Watts** and braking resistance pre-set value options from 20 to
999 Watts and a braking resistance from level 1 to 32.
PULSE
Displays the heart rate***
*Note on calorie measurement
Energy consumption is calculated using a general formula.
It is not possible to determine an individual energy consumption exactly,
as this requires a large amount of personal data.
The energy consumption displayed is an approximation and not an exact value.
**Note on heart rate measurement
The watt display is not calibrated. An optionally available heart rate transmitter belt is required for this purpose. MAXXUS recommends the use
of the POLAR T34.
***Note on the watt display
The watt display is not calibrated.
Cockpit
