19
5 Initial start-up
It is absolutely necessary to comply with the
following safety instructions for the initial start-up of
the machine. This will prevent injury to individuals,
damage to machinery and other property damage.
•
The initial start-up may only be carried out by
qualified individuals, complying with the safety
instructions.
•
Before the first start-up, check whether all the
tools and parts not belonging to it have been
removed from the machine.
•
Before the first start-up, check the electrical
connections.
•
Activate all safety equipment and EMERGENCY
SHUT-OFF switches before the initial start-up.
•
Also read section "General Safety Instructions".
1 Check prior to first start
Prior to starting up the machine, the following must
be checked:
•
are all safety devices available?
•
was the machine damaged during transport?
•
all visible bolted joints must be checked for tight
seat.
•
Prior to putting the machine into operation, the
machine’s connecting cable and the cable of the
pedal switch for start/stop must be checked for
damages.
