Preparing the Floor:
Mounting surface must be clean and leveled before new toilet is installed.
REV. 09272018
INSTALLATION GUIDE
www.maykke.com
INSTALLATION GUIDE
Installing the Toilet
Installing the Wax Ring
•
Invert toilet on floor, being sure to cushion to prevent damage. Install wax ring
according to manufacturer’s instructions.
•
Apply a thin layer of sealant around base of toilet.
CLOSET BOLT INSTALLATION
IMPORTANT NOTE REGARDING WATER SUPPLY
Install closet bolts in flange channel, turn 90°,
and slide into place 6” apart and parallel to
wall.
Before installation ensure that the shut-off valve is greater than
7-1/2” from the center of the drain of the shut-off valve on
either side.
DIMENSIONS (Nominal)
Note: The distance from the wall to
the closet flange centerline must be a minimum of 12-1/16” .
12-1/16”
Sold separately
Finished wall
Water
supply outlet
12-1/16”
C/L outlet
Finished floor
C/L
Step 1 :
Install new floor bolts into floor flange.
See Figure 1.
Figure 1.
2
7-1/2”
