REV. 09272018
INSTALLATION GUIDE
www.maykke.com
INSTALLATION GUIDE
Step 6 :
Connect the flexible water supply line
(not included) to the shut-off valve.
Tighten coupling nut securely.
See Figure 6.
Figure 6.
Installing the Toilet Seat
•
Place the toilet seat cover on bowl, insert the bolt, washer and rubber cord in hinge
install hole-order.
•
Adjust position of toilet seat cover to match toilet set suitably after insert rubber
cord into toilet install hole.
•
Tighten the bolt and close the hinge cover.
•
Insert the nut into the two holes perfectly and screw it with scresdriver, then put
the cap on it.
Bolt
Small washer
Big washer
Rubber cork
Toilet seat cover
Hinge
Toilet set
Toilet cover
Cap
Toilet bowl
For warranty information please check www.maykke.com.
For customer service concerns please call: 877.659.2858 or email: support@maykke.com
•
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush
or scouring pad to clean surfaces.
•
Soft abrasive cleaners may be used when necessary to clean our products. Strong
abrasive cleaners will scratch and dull the surface.
Care Guide
4
