3
CHARGING
The device is charged directly by a USB cable supplied.
•
Connect the micro USB plug into the charging socket (G).
•
Connect the type A USB plug to a 5V 1A supply.
•
The battery charging status can be confirmed by the illumination of a red LED light (C) on
the front of the headlamp. Once the charging is complete the light will turn green.
•
Fully charge the device at least once every three months to ensure the condition of the
battery is maintained.
OPERATION
A
–
Mode button. Select the desired colour temperature (2,700K, 4,500K, 6,500K) or SOS
B
–
ON/OFF and Dimmer dial. Can be used to adjust the intensity of the headlamp from 40lm
to 300lm.
C
–
Charging LED indicator
D
–
300 Lumen 3W COB headlamp
E
–
Motion sensor switch
F
–
Motion sensor LED indicator. Blue LED indicates motion sensor is activated.
G
–
USB charging socket
Tilt the bracket on the headlamp to a maximum of 60 Degrees.
A
B
C
D
E
F
G
