4
CHECK YOUR VENT SYSTEM FOR GOOD AIRFLOW
Good airflow
Along with heat, dryers require good airflow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See Installation
Instructions.
The venting system attached to the dryer plays a big role
in good airflow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
To maintain good airflow:
Good
Better
USE AUTOMATIC DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS
Use the Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Dry
cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the
dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
n
Clean your lint screen before each load.
n
Replace plastic or foil vent material with 102 mm (4")
diameter heavy, rigid vent material.
n
4"
102 mm
Use the shortest length of vent possible.
n
Use no more than four 90° elbows in a vent system;
each bend and curve reduces airflow.
n
Remove lint and debris from the exhaust hood.
n
Remove lint from the entire length of the vent system
at least every two years. When cleaning is complete,
be sure to follow the Installation Instructions supplied
with your dryer for final product check.
n
Clear away items from the front of the dryer.
SPECIFICATIONS
These units are sold in multiple regions with different
requirements for measuring capacity. Below are a few
of the valid forms of measure posted on this product:
Dry Linen Capacity:
A weight measure in load size
that reflects the volumetric size of the dryer drum.
IEC Capacity:
The capacity measure that represents
the maximum capacity of dry linens and textiles which
the manufacturer declares can be treated in a specific cycle.
IMPORTANT:
This appliance is intended to be used in
household and similar applications such as:
n
staff kitchen areas in shops, offices, and other working
environments;
n
farm houses;
n
by clients in hotels, motels, and other residential-type
environments;
n
bed and breakfast-type environments;
n
areas for communal use in blocks of flats or in launderettes.
Models
3LMEDC315FW
3LMEDC415FW
4KMEDC215FW
4KMEDC315FW
4KMEDC415FW
4KMEDC425FW
Rated Voltage
220–240 V 2N~
220–240 V 2N~
Rated Frequency
50 Hz
60 Hz
Rated Current
20 Amps
20 Amps
Dry Linen Capacity
(Maximum)
15 kg (33 lb)
15 kg (33 lb)
IEC Capacity
7 kg (15 lb)
7 kg (15 lb)
Height
1067 mm (42")
1067 mm (42")
Width
737 mm (29")
737 mm (29")
Depth
706 mm (27
13
⁄
16
")
706 mm (27
13
⁄
16
")
NOTE:
The noise level of the dryer is below 70 dB(A).
