14
NOTE:
Except when first turning on the refrigerator, do not
adjust either temperature control more than one setting at a
time. Wait 24 hours between adjustments for the temperature
to stabilize.
Additional Digital Control Center Features
PowerCold
®
The PowerCold
®
feature assists with periods of high refrigerator
use, full grocery loads, or temporarily warm room temperatures.
■
Press the PowerCold
®
touch pad to set the freezer and
refrigerator to the lowest temperature settings. Press
the PowerCold
®
touch pad again to return to the normal
refrigerator set point.
NOTE:
The PowerCold
®
feature will automatically shut off in
approximately 12 hours.
Max Ice
The Max Ice feature assists with temporary periods of heavy ice
use by increasing ice production.
■
Press the Max Ice touch pad to set the freezer to the lowest
temperature setting. Press the Max Ice touch pad again to
return to the normal freezer set point.
NOTE:
When Max Ice is on, the (+) and (-) pads for the freezer
control will not operate. The Max Ice feature will automatically
shut off in approximately 24 hours.
Humidity Control
The Humidity Control feature turns on a heater to help reduce
moisture on the door hinge seal. Use in humid environments or
when you notice moisture on the door hinge seal. The refrigerator
uses more energy when Humidity Control is on.
■
Press Humidity Control when the environment is warm and
more humid, or if you notice moisture on the door hinge seal.
The indicator light will be lit when humidity control is ON.
■
Press Humidity Control to save energy when the environment
is less humid.
Temp Alarm
The Temp Alarm feature provides temperature information in the
event of a power outage.
Power outage:
During a power outage, if the temperatures in the
refrigerator and freezer compartments exceed normal operating
temperatures, the highest temperature reached will be displayed.
■
Press the Temp Alarm touch pad until the indicator light is
lit, to turn on this feature. Press and hold Temp Alarm for
3 seconds until the indicator light goes off to turn off this
feature.
Temp Alarm:
An alarm will sound repeatedly if the freezer or
refrigerator compartment temperatures exceed normal operating
temperatures for an hour or more.
The temperature displays will alternately show the current
temperatures and the highest temperatures the compartments
reached.
■
Press the Temp Alarm touch pad once to stop the audible
alarm and alternating temperature displays. The Temp Alarm
light will continue to flash until the refrigerator returns to the
set temperature.
Door Alarm
The Door Alarm feature sounds a chime every few seconds when
the refrigerator door has been left open for 5 continuous minutes.
The chime will sound until the door is closed or Door Alarm is
turned off.
■
Press the Door Alarm touch pad to turn this feature on or off.
The indicator light will be lit when the Door Alarm feature is
on.
Filter Reset
The Filter Reset control allows you to restart the water filter status
tracking feature each time you replace your water filter. See
“Water Filtration System.”
■
Press and hold the Filter Reset touch pad for 3 seconds, until
the Order or Replace light turns off.
Digital Control User Preferences
The control center allows you to set user preferences, if desired.
Temperature Display (F_C)
This preference allows you to change the temperature display.
F - Temperature in degrees Fahrenheit
C - Temperature in degrees Celsius
Alarm (AL)
This preference allows you to turn off the sound of all alarms.
ON - You will hear the alarm sound.
OFF - You will not hear the alarm sound.
