background image

11

Broiling

When broiling, preheat the oven for 5 minutes before putting food 

in unless recommended otherwise in the recipe. Leave the desired 

oven door open 6" (15 cm) at the broil stop position to ensure 

proper broiling temperature. Position food on grid in a broiler pan, 

and then place it in the center of the oven rack.

NOTE: 

Odors and smoke are normal the first few times the oven 

is used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise 

control when cooking. The lower the broil setting is, the slower the 

cooking. Thicker cuts and unevenly shaped pieces of meat, fish, 

and poultry may cook better at lower broil settings. Refer to the 

“Positioning Racks and Bakeware” section for more information.
On lower settings, the broil element will cycle on and off to 

maintain the proper temperature.

 

For best results, use a broiler pan and grid. It is designed to 

drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be 

ordered. See the “Accessories” section.

Cook Time

To Set a Timed Cook:

1. 

Press BAKE.

2. 

Press the Temp/Time “+” or “-” keypad to set the desired 

temperature. Press and hold to scroll quickly. The temperature 

will not scroll past the minimum or maximum allowable 

temperature.

3. 

Press COOK TIME.

4. 

Press the Temp/Time “+” or “-” keypad to enter the length of 

time to cook.

5. 

Press START. The display will count down the time. When the 

time ends, the oven will shut off automatically.

6. 

Press CANCEL to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time 

of day. See the “Clock” keypad feature in the “Feature Guide” 

section. 

1. 

Press BAKE.

2. 

Press the Temp/Time “+” or “-” keypad to set the desired 

temperature. Press and hold to scroll quickly. The temperature 

will not scroll past the minimum or maximum allowable 

temperature.

3. 

Press COOK TIME.

4. 

Press the Temp/Time “+” or “-” keypad to enter the length of 

time to cook.

5. 

Press DELAY START.

6. 

Press the Temp/Time “+” or “-” keypad to enter the time of day 

to start. Press and hold to scroll quickly.

7. 

Press START.
When the start time is reached, the oven will automatically 

turn on. The temperature and/or time settings can be changed 

anytime by repeating steps 1 through 7. When the set cook 

time ends, the oven will shut off automatically and “End” will 

appear on the display.

8. 

Press CANCEL to clear the display.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before 

or after cooking.
Doing so can result in food poisoning or sickness.

Summary of Contents for MER6600FB

















Reviews: