Maytag SD-1, User Manual

4

Special Options

Damp Dry

is located on the Time Dry Air Fluff sec-

tion of the dial. It is designed to partially dry items
and can be used with any temperature selection.

Damp Dry

will provide 20 minutes of tumbling

time, followed by 5 minutes of cool-down tum-
bling. 

Wrinkle Release

will release wrinkles from items

that are clean and dry but only slightly wrinkled,
such as from a crowded closet or suitcase, or from sit-
ting in the dryer too long after the cycle has ended.

Wrinkle Release 

provides 10 minutes of tumbling

followed by five minutes of cool-down tumbling
and can be used with any temperature selection.

Press Start

Push this button to start the dryer. The dryer door
must be shut for the dryer to operate. If the door is
opened during the cycle, the Start button must be
pushed again to resume the cycle once the door is
closed. 

NOTE: 

The dial can be turned in either direction to

select a cycle. Once started, the dial will not advance
at a specific rate during the Auto Dry cycles. At first
the dial may not advance at all. Toward the end of the
cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quick-
ly. This is normal operation.

Step  3

Step  2  

Cont.

Select Cycle

Time Dry Air Fluff

This cycle can be used to regulate the drying time.
Use with Air Fluff, Low, Medium or Regular tem-
perature settings. For timed drying, turn the control
dial until the pointer points to the proper time set-
ting in the Time Dry Air Fluff cycle.

NOTE:

Using the Air Fluff temperature setting will

require a longer drying time.

End of Cycle Signal

Shortly before the cycle is complete, an audible signal
will sound.