11
Installation spacing for recessed area
or closet installation
n
All dimensions show recommended and minimum spacing
allowed.
n
Additional spacing should be considered for ease of
installation and servicing.
n
Additional clearances might be required for wall, door, floor
moldings, and dryer venting.
n
Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
n
For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are
acceptable.
n
Companion appliance spacing should also be considered.
1"
(25 mm)
3"
(76 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
9"
(229 mm)
18" min
(457 mm)
Recessed or closet installation (dryer only):
Mobile home - Additional installation requirements:
This dryer is suitable for mobile home installations.
The installation must conform to standard CAN/CSA-Z240 MH.
Mobile home installations require:
n
Metal exhaust system hardware, available for purchase
from your dealer.
n
Special provisions must be made in mobile homes to
introduce outside air into dryer. Openings (such as a nearby
window) should be at least twice as large as dryer exhaust
opening.
Custom undercounter installation (dryer only):
1"
(25 mm)
1"
(25 mm)
33
1
/
4
"
(845 mm)
23
3
/
8
"
(594 mm)
1"
(25 mm)
5
1
/
4
"
(133 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
3"
(76 mm)
3"
(76 mm)
66
1
/
4
"
(1683 mm)
12"
(305 mm)
1"
(25 mm)
Recessed or closet installation –
Stacked with stack kit:
