2
toolS and PaRtS
Gather the required tools and parts before starting installation.
tools needed:
Utility knife
1/4" hex-head ratchet
or open-end wrench
Level
9/16" open-end wrench
Pliers or slip-joint pliers
Bucket
INSTALLATION REQUIREMENTS
loCatIon RequIRementS
note:
If the washer/dryer and pedestal assembly are located in
a garage, 3
"
(76 mm) must be added under the pedestal so that
the washer/dryer is 18" (458 mm) above the garage floor.
Towel
Sponge
Parts Supplied:
Four #12 x 3/4" hex-head
Drawer divider
sheet metal screws
additional Items needed:
1/4" nut driver
5/16
"
hex-head ratchet
or nut driver
