Maytech MTSKR1712 Remote control Users Manual V2.1
Maytech Electronics Co.,Ltd
第
4
页
共
5
页
2) Press the remote control ON/OFF button for 2seconds. Remote has switched on when 3 leds light,
continue to press the on/off button to enter self-detection status for 3 seconds, 3 leds flash quickly.
3) Connect power to receiver, LED 4(Red light) quickly flashes. The receiver is in searching status and
auto-pairing with remote control. Red led lights steady. Pairing competed.
3. Receiver exit pairing status if it failed to search for remote when LED4 quick flashes(for about 3s),
When LED4 starts slow flashing, the pairing fails.
Ⅷ High speed/Low speed level
1. Whatever high speed level or low speed level, when THROTTLE is in middle position, receiver
outputs 1.5ms PWM signal; and when push THROTTLE back to bottom, receiver outputs 1.0ms
PWM signal.
2. If LED1 is slow flashing, it is low speed level. Push THROTTLE to top, receiver outputs 1.8ms PWM
signal.
2. Click BUTTON and LED1 is quick flashing, it is high speed level. Push THROTTLE to top, receiver
outputs 2.0ms PWM signal.
Ⅸ Forward/Backward
1. This function can be realized when this remote works with Maytech dual ESC (MTDU30A). Tt is
unworkable for other ESCs.
2. Turn on remote and receiver, double click BUTTON, LED2 quickly flash 2 times, and light off for 1
second. It cycles 4 times like this. Then ESC is in Forward status.
3. Double click BUTTON again. LED2 quickly flash 1 time, and light off for 1 second. It cycles 4 times
like this. ESC is in Backward status.
Ⅹ LED1/LED2/LED3 status description
1. LED1/LED2/LED3 flash quickly at same time
→
In Pairing status.
2. Working Status:
LED1 lights steady
→
Successful pairing with receiver.
LED1 slow flashing, → Unsuccessful pairing with receiver.
3.
Working Status:
LED2 light off, remote battery voltage > 3.9V;
LED2 slowly flash, remote battery voltage is 3.65-3.9V;
LED2 quickly flash, remote battery voltage is 3.4-3.65V;
LED2 steadily light, remote battery voltage < 3.4V.
4.
Working Status:
LED3 light off, skateboard battery voltage > 39V (with 10S battery);
LED3 slowly flash, skateboard battery voltage is 36.5-39V;
LED3 quickly flash, skateboard battery voltage is 34-36.5V;
LED3 steadily light, skateboard battery voltage < 34V.
