6
COMM. 12 Robotic Pool Cleaner
|
User Manual
7. REMOTE CONTROL UNIT
The remote control
unit offers two
operation modes:
automatic mode and
manual direction
control mode.
In automatic mode,
the cleaning cycle
length can be
changed.
In manual direction
mode, the robot’s
motion can be
controlled manually.
Radio reception meter
When no black lines are showing, move
closer to the power supply unit
Battery level meter
When flashing, change the batteries
Manual control indicator
When flashing, you are in manual direction
control mode
Cleaning cycle icons
Forward
Turn right
Turn left
Backward
On/Off button
Manual/automatic select button
Set/OK button
Direction control arrows
The remote control unit enables you to manually control the Robotic Pool Cleaner, to clean those hard-
to-reach spots or places that were skipped during the standard cleaning cycle.
Manual direction control mode
1. Press the On/Off button once. This puts the remote
control in manual direction mode. Use the direction
control arrows (see right) to control the movement
of the robot around the pool.
2. Press the Forward or Backward arrows to
maneuver the Robotic Pool Cleaner forwards or
backwards at a faster speed.
3. Press the Forward or Backward arrows again to
maneuver the Robotic Pool Cleaner forwards or
backwards at the standard cleaning speed.
4. To stop the Robotic Pool Cleaner, press the arrow
showing the opposite direction to the direction in
which the robot is currently moving.
5. When the robot is idle (standing still) and you press
the Turn Left or Turn Right arrows, the robot will
turn left or right by moving one belt forwards and
the other backwards.
6. If you press the Turn Left or Turn Right arrows
while the robot is driving forwards or backwards,
the robot will turn left or right by turning one belt
and stopping the other belt.
