Maytronics Remote Control Unit
Setting the Automatic Mode
Cleaning cycle indicator
This determines the cleaning
cycle time. The RCU allows
you to choose between the
following options.
Fast
2 hour cycle
Efficient
(Default Setting)
3 hour cycle for
everyday use
Extra
4 hour cycle
Delay Time indicator
This determines when the
pool cleaner starts to work. A
delay allows the dirt to settle
to the bottom of the pool.
Immediate start
(Default Setting)
1 hour delay
2 hour delay
Cleaning action indicator
Allowing you to choose from
the following options.
Standard
Floor and wall cleaning
(Default Setting)
Ultra-Clean
Stronger suction and
slower movement.
Floor Only
Cleans only the
floor and coves.
Walls Only
Cleans walls and
waterline only
6
User Instructions
To Change the Automatic Mode settings
First press the Manual/Automatic select button, then set according to the following table:
Note:
After 2 minutes, if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will continue to work
in the previous settings.
When the “Ultra-Clean,” and “Walls Only” options finish their cycles, the RCU will return to default settings.
