Maytronics Dolphin Liberty, User Instructions

16

Dolphin Liberty

|

User Instructions

9.3.  Automatic mode settings

To change the automatic mode settings, press the manual/automatic select button and then choose 
the desired parameters according to the following table:

Cleaning cycle 
indicator

This determines 
the length of the 
cleaning cycle. 

Fast

1 hour cycle

Efficient

1.25 hour cycle 
for everyday use. 
(default setting)

Heavy duty

1.5 hour cycle

Delay time 
indicator

This determines 
when the pool 
cleaner starts to 
work. Delaying 
allows the dirt 
to settle to the 
bottom of the 
pool.

Immediate start 

(default setting)

One-hour delay

Two-hour delay

When activated, 
the green LED will 
flash every five 
seconds.

Cleaning action 
indicator

Standard

Floor and wall 
cleaning
(default setting)

Ultra-clean

Stronger suction 
and slower 
movement when 
cleaning floor and 
walls.

Floor only

Cleans only the 
floor and the area 
where the floor and 
walls meet.

Walls Only

Cleans walls and 
waterline only.

Note:

•  If no button is pressed after two minutes, the remote control automatically turns off.

The robot will continue to work according to the last settings chosen.

•  After “Ultra-clean” and “Walls only” cleaning cycles, the robot returns to default settings.
•  In “Floor only” mode, the cleaning cycle will stay as it is until deliberately changed.

Liberty_English_v5.indd   16

Liberty_English_v5.indd   16

3/22/12   10:32 AM

3/22/12   10:32 AM