maintenance
Troubleshooting
HeatMiser II
Installation guide. © 2014, all rights reserved
P a g e
|
16
TROUBLESHOOTING
Problem:
What to do:
The pool is not hot enough
Make sure that the pump is circulating
appropriately and that pool water is flowing
through the solar collector.
Make sure that the pump is shut off during
night or cold weather.
Check that the solar collector meets your
pool volume heating demand.
Put your pool cover on at night and
whenever the pool is not in use to prevent
heat loss.
Make sure the collector is exposed to the
sun at least 6 hours per day.
Bubbles flow continuously out of the pool
water inlet.
Check all connections for leaks and air
suction.
Check and make sure that water flows
continuously through the pump and the solar
collector.
Leaking solar collector
Fittings leaks - Check the 'O ring', make sure
it is in its place and not pinched. Strengthen
the Metal Hose Clamp around the Hose
Adapter Fitting.
Absorber leaks - disable the leaking riser
tube according to the instructions on page 17.
